NetLINK HTB-1100S Single-mode Fiber Ethernet Media Converter

NetLINK HTB-1100S Single-mode Fiber Ethernet Media ConverterNetLINK HTB-1100S 10/100M Single-mode Fiber Optic Media Converter is the conversion equipment of Ethernet optical-electronic signals between 10/100M UTP interface (TX) and 100M Fiber interface (FX).The traditional 10/100M Fast Ethernet can be extended to a distance of 120km through an optical fiber link. The performance and quality of the products are excellent because of adopting the latest IC.6 Group LED indicated lights could fully monitor the working conditions of Converters. It is easy for users to observe the network operations.The auto-negotiation function allows the UTP port to select the transmission mode of 10/100M and Full Duplex or Half Duplex.UTP port supports MDI/MDI-X auto crossover.Multiple optical interfaces to be chosen: SC, ST or FC,single mode/multimodeSupporting 1552 Byte packetThe internal circuit of prevented thunder could greatly reduce the damage to the converter caused by thunderbolt induction.Design of internal or external power supply for selection by usersSpecificationOperating standards: IEEE802.3u, 10/100Base-TX and 100Base-FXMAC address table: 1KConnector:UTP: RJ-45 10/100Mbps;Fiber: ST/SC/FC 100MbpsCable:UTP: Cat. 5 UTP (the max distance up to 100m)Fiber (Multimode): 50/125, 62.5/125μm(the max distance up to 2km or 5km)Fiber (Singlemode): 8.3/125, 8.7/125, 9/125, 10/125μm(the max distance up to 20 -120km)Flow ControlFull Duplex: Supporting standard IEEE802.3xHalf Duplex: BackpressureLED: Power, FX FDX, FX Link/Act, TX 100, TX FDX, TX Link/Act.Power: AC 110V-240V to DC 5V; DC 48V to DC 5V.Ambient Temperature: 0 ℃ ～ 70 ℃Humidity: 5% ～ 90%Dimensions:Internal power: 30x110x140mmExternal power: 26x70x93mm